Hydro Jetting in Boston, MA
High-pressure water jetting for thorough pipe cleaning
Hydro jetting is the most effective method for completely cleaning your sewer and drain lines. Using high-pressure water (up to 4000 PSI), we blast away grease, scale, tree roots, and years of buildup that regular snaking can't remove. This process not only clears clogs but also thoroughly cleans your pipes, helping prevent future problems.
Signs you need this service
- Recurring drain clogs
- Slow drainage throughout the house
- Grease buildup in commercial kitchen lines
- Tree root intrusion in sewer lines
- Old pipes that haven't been professionally cleaned
Our process
Video Inspection
Inspect the line with a camera to assess condition and locate issues
Setup
Position the hydro jetting equipment at the cleanout
Jetting
Send high-pressure water through the line to scour pipes clean
Post-Inspection
Camera inspection to verify thorough cleaning
Documentation
Provide before/after video footage
Call for a free estimate - best value for severe clogs and preventive maintenance.
Frequently asked questions
How much does hydro jetting cost?
The cost depends on the length of the line, how severe the buildup is, and how easy the cleanout is to reach. We give you an upfront price after we know what we are dealing with, with no surprises on the bill. Call (781) 858-8314 for a free estimate.
Is hydro jetting safe for older pipes?
Hydro jetting is powerful, and on very old or already-damaged pipe it is not always the right call. That is why we run a camera inspection first to check the pipe's condition. If jetting is safe we jet; if the pipe is fragile we recommend a gentler method. We have been making that judgment on Boston-area homes since 1997.
What is the difference between hydro jetting and snaking?
A snake (cable) punches a hole through a clog to restore flow. Hydro jetting uses high-pressure water to scour the entire pipe wall clean, removing grease, scale, and root debris that a snake leaves behind. Snaking is a quick fix; jetting is a thorough cleaning.
Does hydro jetting remove tree roots?
Yes. High-pressure water (up to 4,000 PSI) cuts through and flushes out root intrusion, then cleans the pipe wall so the line flows freely again. For heavy root masses we may cut them mechanically first, then jet.
How often should I have my drains hydro jetted?
For most homes, only when you have recurring clogs or slow drains. Commercial kitchens with grease lines often benefit from scheduled jetting. We give you an honest recommendation based on what the camera shows, not a service you do not need.
How long does hydro jetting take?
Most residential jobs take one to two hours, depending on the line length and how much buildup there is. We give you a time estimate when we quote the job.
Ready to get it fixed?
Call Snake-It-Away for fast, honest drain and sewer service across the Boston metro.
Call (781) 858-8314